• State Not Answered
  • Date
    aruvin - Former HES Forum Member
  • Date
  • Replies 16 replies
  • Subscribers 5 subscribers
  • Views 3214 views
  • Users 0 members are here
Options
Related

DMX universe on DML..

Hi all,

need urgent help here on my DMLs setup..

Basically I am running 08 units of DMLs via artnet and a MA lighting Console. But the problem is I am not able to change the DMX universe on the DML itself. It always goes back to 1 whenever I exit or enter again.. Only 1 out of the 8 units can change the DMX universe..

Anyone encounter this before??

thx
Parents
  • 0
    Dear Aruvin,
    I talked to Zack who is with you some hours ago?

    Anyway what Paul says above is true. When upgrading you have to disconnect BOTH DMX and any Artnet Source, that means disconnect the lighting desks network.
    Do not try to update the Formatter for now, just uncheck the Formatter sofware update.
    Eddie Ang has a special instruction if the Formatter has locked up.

    And, some of the upgrades before 1.1.4 requires a Power off / on

    Please also take it easy, dont ruch, it takes some time! 5-15 min.

    I am available on the phone call me on:+4686268905
Reply
  • 0
    Dear Aruvin,
    I talked to Zack who is with you some hours ago?

    Anyway what Paul says above is true. When upgrading you have to disconnect BOTH DMX and any Artnet Source, that means disconnect the lighting desks network.
    Do not try to update the Formatter for now, just uncheck the Formatter sofware update.
    Eddie Ang has a special instruction if the Formatter has locked up.

    And, some of the upgrades before 1.1.4 requires a Power off / on

    Please also take it easy, dont ruch, it takes some time! 5-15 min.

    I am available on the phone call me on:+4686268905
Children
No Data

www.etcconnect.com