RDM - Talkback Information

Hi,

Is RDM / Talkback enabled on the DL1?

If so, can anybody direct me toward some documentation?

In particular, I need to know what kind of information we can get back from the DL1.

It the "current pan/tilt motor positions" available this way?

Thanks,
Sebastien

Parents

0 deleted HES user - Former HES Forum Member over 16 years ago

Hi Sebastien,

This feature is not enabled for the DL.1, and there is not talkback from the fixture. If you are using a lighting console that will show a raw DMX window which shows DMX output from the console you can get information that way, but it is only is only DMX values. I'm not sure how helpful that would be to you.

Thanks,
p
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 deleted HES user - Former HES Forum Member over 16 years ago

Hi Sebastien,

This feature is not enabled for the DL.1, and there is not talkback from the fixture. If you are using a lighting console that will show a raw DMX window which shows DMX output from the console you can get information that way, but it is only is only DMX values. I'm not sure how helpful that would be to you.

Thanks,
p
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data