RDM - Talkback Information

Hi,

Is RDM / Talkback enabled on the DL1?

If so, can anybody direct me toward some documentation?

In particular, I need to know what kind of information we can get back from the DL1.

It the "current pan/tilt motor positions" available this way?

Thanks,
Sebastien

Parents

0 blobule - Former HES Forum Member over 15 years ago

What I need (or wish) is to get "actual" pan/tilt controller positions as the DL1 (or DL2, I have both actually) is moving.

For example, if I say move from PAN=0 to PAN=60000 (DMX values) in 10 seconds (using MSPEED), I would expect to get from the talkback the pan DMX value gradually incrementing from 0 to 60000 during 10 seconds.

Can this be done, if not on the DL1, maybe on the DL2?

Thanks
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 blobule - Former HES Forum Member over 15 years ago

What I need (or wish) is to get "actual" pan/tilt controller positions as the DL1 (or DL2, I have both actually) is moving.

For example, if I say move from PAN=0 to PAN=60000 (DMX values) in 10 seconds (using MSPEED), I would expect to get from the talkback the pan DMX value gradually incrementing from 0 to 60000 during 10 seconds.

Can this be done, if not on the DL1, maybe on the DL2?

Thanks
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data