So i have a rig in in the air, And s-video running up to the DL2 that i have in the air. I go to my console and try to switch to the S video and nothing happens the graphic eng stays in. I thought maybe i was missing S-video to the DL so i put a monitor on the other end of the S cable and saw signal. Im not sure what im doing wrong. Please HELP!!
Also be sure to set the s-video capture relay in the correct position.
On Hog-3 It must be set to "s-video" not to "camera"....not sure if gMA uses the same terminology for the fixtures. Thsi must be done with Motion Intensity set to 00% for about 10 seconds or the relay will not change positions.
Also be sure to set the s-video capture relay in the correct position.
On Hog-3 It must be set to "s-video" not to "camera"....not sure if gMA uses the same terminology for the fixtures. Thsi must be done with Motion Intensity set to 00% for about 10 seconds or the relay will not change positions.
