• State Not Answered
  • Date
    Cormac Jackson
  • Date
  • Replies 6 replies
  • Subscribers 7 subscribers
  • Views 812 views
  • Users 0 members are here
Options
Related

DL3 Live camera setup

Hi,
Is there any difference in using the built in cameras on a DL3 then the cameras on a DL2?
Is the principle the same that you run the s-video/SDI input back and reroute the signal to the correct fixture? Am i correct in saying i can now use the SDi to send/return the camera signal??
Is the d-tec pro switcher still the correct equipment to spec for this setup or are there alternatives?
Anything different to look out for when setting this up on DL3 fixtures?

Again anyone who has used this setup will be at an advantage in explaining it to me.

Thanks Cormac
Parents
  • 0
    Ok,
    that helps last questions.
    In my previous setup i have had an external source(laptop) which i ran into a dtec switcher and changed the input so the DL2 fixtures saw the laptop output via s-video input.
    Can the DL3 see the s-video and SDI input at the same time or can i use only one input source?
    Make sense ?
    I did see previous posts about SDI lag or sync issues is this still the case?

    Thanks C
Reply
  • 0
    Ok,
    that helps last questions.
    In my previous setup i have had an external source(laptop) which i ran into a dtec switcher and changed the input so the DL2 fixtures saw the laptop output via s-video input.
    Can the DL3 see the s-video and SDI input at the same time or can i use only one input source?
    Make sense ?
    I did see previous posts about SDI lag or sync issues is this still the case?

    Thanks C
Children
No Data

www.etcconnect.com