DL3 change type DL2

Hi,
I am about to program a show on a Hog
Ipc using DL3 fixtures which I know I
am going to have to use DL2 fixtures at
a later point.My questions are.
1.Can you change type between DL3 and
DL2 fixtures?
2.What is going to make this easier and
less complicated now before I program
the show.

tips and any advice would be good.

Regards C

Parents

0 marty postma - Former HES Forum Member over 15 years ago

It is pretty much a seamless process, but you will want to make sure that you DO NOT build your palettes as "Per Type" or you will run into issues once changed. Go with "Global". I got burned by this once and it cost me a lot of time.

The other thing to look out for is that the stock content is different, so don't use any of the addtional content on DL.3 as you won't have these files when you step down to DL.2s.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 marty postma - Former HES Forum Member over 15 years ago

It is pretty much a seamless process, but you will want to make sure that you DO NOT build your palettes as "Per Type" or you will run into issues once changed. Go with "Global". I got burned by this once and it cost me a lot of time.

The other thing to look out for is that the stock content is different, so don't use any of the addtional content on DL.3 as you won't have these files when you step down to DL.2s.

Hope this helps. :)
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data