Revolution won't power up

Hello All,

I have a Revolution that is not powering up. I have swapped out the power supply module and the control data module as well as the SCC board... Checked that power is making it into the power module as well...

Any thoughts?

Parents

corey cascio over 10 years ago

Hi RS,

do the LEDs come on at all?

does the S4R try to calibrate when you turn it on?

Can you remove any inserted Modules so those bays are empty and try and power up?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
rsmentele over 10 years ago in reply to corey cascio

I get nothing, no LED's no calibration.. nothing

Pulled the Iris and RWM and still nothing
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
corey cascio over 10 years ago in reply to rsmentele

Do you have a working S4R to swap its PSU and MCC out with?

Most likely then its a cabling problem - either the connectors

are connected backwards or the cables are damaged?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

corey cascio over 10 years ago in reply to rsmentele

Do you have a working S4R to swap its PSU and MCC out with?

Most likely then its a cabling problem - either the connectors

are connected backwards or the cables are damaged?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data