Colorsource Spot and a zoom lens

Hello,
Yes, all Source Four lenses and accessories will work on the ColorSource Spot as well as the S4 LED CYC and Fresnel Adapters. The only exception to this is that the 50 degree EDLT lens has a special version for the LED fixtures.

I hope this helps

Jim Uphoff

Very much Thank you!

I contacted ETC sales and was told the following:

" The Color Source Spot is a stand-alone engine that only accepts lens tubes so the Zoom lens is out. All other standard Source 4 accessories are good"

So there ya go. No zoom. All else is good. There is some misleading copy at the websites of certain vendors leading one to believe the zomm will work on a Color Source which is why I inquired.

That is incorrect. Zoom lenses will work just fine. All you have to do is remove the barrel to attach them.

Who did you talk to in sales.

Jim Uphoff
Fixture Product Manager
ETC

Hi Everyone,

Jim is the product manager for the line, so he knows what he is talking about.  But since seeing is believing. Here are some photos I took this morning of a Color Source Spot being adapted to a Zoom lens in our demo room.  Also a video for those that wish to check it out.

Please let us know who you talked to in sales or what dealer sites you thought were incorrect and we would be happy to work on correcting that information.  Please feel free to email me privately if needed.  chris.stokes@etcconnect.com

Thank you!

Video:  ColorSource Spot with Zoom Assembly