I would think this has come up before, but I couldn't find a thread.

I hope ETC is looking at lengthening the yoke on the LED PARS to allow the unit to move thru the yoke with cables attached and not make one have to unplug them, or bend them at a really sharp angle to change the focus.

  • The Seladors are awful with this. ColorSource PARs are a little more accommodating, but could still use an extra inch or so.

    The literature for the ColorSource PAR states that an "expandable floor stand" yoke is also available; I don't know if that provides more clearance between the PowerCon and DMX connectors and the yoke, though.