Mix 3 and 4 Outputs?

many many led video wall products ( not led dmx fixtures ) and projectors including barco projectors can be setup to only display part of the screen.

on several shows last year i had 5 'video' outputs running as submixes to low resolution video walls.
On several shows last year - i had versions of software with 6 sub-mixes at the same time

the barco led wall - i think they are called d320 - screen processors can be programmed to display any part video input signal in any part of the video wall.

led screens run at quite low resolution the dot pitch is normally between 6mm and 10mm.

to use the sub-mixes you set up to video system to only display the submix.

you can also use a folsom image pro-hd - to cut up the image and send each submix to an sdi output.
i also did this on several shows last year.

you can run a single output screen at 1280x1024 or even 1600x1200 - and get 4 standard definition video outputs using a folsom image pro-hd to cut up the dvi input into 4 standard definition sdi outputs.

not only that but many video walls used in rocknroll touring are not in a 4:3 aspect ratio - but are long or thin.
the sub-mix mean you can have the output mix the exact shape you need for your led wall.

many many led video wall products ( not led dmx fixtures ) and projectors including barco projectors can be setup to only display part of the screen.

on several shows last year i had 5 'video' outputs running as submixes to low resolution video walls.
On several shows last year - i had versions of software with 6 sub-mixes at the same time

the barco led wall - i think they are called d320 - screen processors can be programmed to display any part video input signal in any part of the video wall.

led screens run at quite low resolution the dot pitch is normally between 6mm and 10mm.

to use the sub-mixes you set up to video system to only display the submix.

you can also use a folsom image pro-hd - to cut up the image and send each submix to an sdi output.
i also did this on several shows last year.

you can run a single output screen at 1280x1024 or even 1600x1200 - and get 4 standard definition video outputs using a folsom image pro-hd to cut up the dvi input into 4 standard definition sdi outputs.

not only that but many video walls used in rocknroll touring are not in a 4:3 aspect ratio - but are long or thin.
the sub-mix mean you can have the output mix the exact shape you need for your led wall.