• Date
    Jeff Toussieng
  • Date
  • Replies 8 replies
  • Subscribers 105 subscribers
  • Views 8048 views
  • Users 0 members are here

Net2 two port touring node

I was given this node.  I have a Windows 7 laptop running NCE version 4.1.0.  I am trying to connect however of course I don't know what address has been assigned to the node.

The screen shows Pathway Loader v2.0.2 Bootp..Dynamic IP Forced.

Any suggestons?  To start I tried 24 ranges of 10.101.1.101 - 124 with no luck.

Also does it look like the software version of the node is older than NCE I am running?

Parents

  • It sounds like the node is trying to download code. What you should do is :

    - Set your PC to a typical ETC IP like 10.101.1.1

    - Disable any other network cards

    - Run NCE

    - Go to Network and Select "Network Address Server"

    - If all works correctly you should see "BootP server started" at the bottom right of the screen. If it shows "bootp server stopped", check your IP and firewall settings

    Now the node should fire up, download code and pick up an IP address from your PC

Reply

  • It sounds like the node is trying to download code. What you should do is :

    - Set your PC to a typical ETC IP like 10.101.1.1

    - Disable any other network cards

    - Run NCE

    - Go to Network and Select "Network Address Server"

    - If all works correctly you should see "BootP server started" at the bottom right of the screen. If it shows "bootp server stopped", check your IP and firewall settings

    Now the node should fire up, download code and pick up an IP address from your PC

Children
No Data
Related

www.etcconnect.com