• Date
    Dcoe7
  • Date
  • Replies 2 replies
  • Subscribers 106 subscribers
  • Views 4145 views
  • Users 0 members are here

DMX 2 port gateway Port changing

I have a dmx 2 port gateway and it receives ports 1 and 2 from my Jands Vista. How do I program this node to receive ports 2 and 3? 

Parents

  • Using Gateway Configuration Editor or GCE <http://www.etcconnect.com/product.overview.aspx?ID=20370> from a PC on the lighting network, you can change the input universe from 1 - 2, 2-3 or what ever your needs are at the moment. This applies for  a net3 system. 

     

    If the facility is running net2, you'll need Network Configuration Editor <http://www.etcconnect.com/docs/docs_downloads/console/Network-Configuration-Editor-(NCE)-v431.zip>



    [edited by: Glenn.Gould at 9:23 PM (GMT -6) on Mon, May 19 2014]
Reply

  • Using Gateway Configuration Editor or GCE <http://www.etcconnect.com/product.overview.aspx?ID=20370> from a PC on the lighting network, you can change the input universe from 1 - 2, 2-3 or what ever your needs are at the moment. This applies for  a net3 system. 

     

    If the facility is running net2, you'll need Network Configuration Editor <http://www.etcconnect.com/docs/docs_downloads/console/Network-Configuration-Editor-(NCE)-v431.zip>



    [edited by: Glenn.Gould at 9:23 PM (GMT -6) on Mon, May 19 2014]
Children
Related

www.etcconnect.com