sACN Multicast from the EOS into a Vivid Pixel Driver via Cat5e

No experience with this product, but as long as they stick to the sACN standard, you should be fine

Just be warned that there are two revisions of sACN. Some products don't support both....

Draft and ratified, our consoles support both.

So depending on the product you may need change the output revision the console is transmitting.

This can be swapped under settings>network in the shell

Marcus

I would call the manufacturer or supplier and see if it would be possible to get a demo fixture to verify before you purchase.

We have done several projects that use ETC control sending sACN to non=-ETC devices. As noted in previous posts, as long as the product has implemented sACN to the standard, there should be no issues. This is actually the backbone on why sACN is so great. Just like DMX, as long as the manufacturer develops using the published standard, everything is interoperable.

We don't have any experience with this specific company, but they do list that their supply supports sACN using both multicast and unicast. . The sACN output from all ETC products uses multicast sACN so this should work fine. They support up to 7 universes which is far more than you need for you 240 pixels.

If you can get them to provide a sample supply to us, we would be happy to test this for you before you purchase.

Josh I will bring it up with them and see if they are interested. If not Ill let you know what happens here.

Bryan,
Yep it seemed like it would be fine but I though I would ask before I throw money around. Maybe I can get them to send you a sample., Thanks.