NET3 DMX output combined？

I think this could be done with a 4-port Net3 gateway and advanced Input Patch for three ports if you can get DMX out of the console with DMX cables:

• connect the console output of Universe 1 to Port 1 - DMX Input 1-300 set to output 1/1-1/300
• connect the console output of Universe 10 to Port 2 - DMX Input  200-312 set to output 1/301-1/412
• connect the console output Universe 14 to Port 3 - DMX Input 1-100 set to output 1/413-1/512

You could use port 4 of the gateway as an output for Universe 1 to get the combined output.

Configure the Net3 Gateway with Concert software - the manual is at http://www.etcconnect.com/WorkArea/DownloadAsset.aspx?id=10737495774 and Advanced Input Patch is on page 87.

-Todd

I understand the way you said, but I don't want this kind of physical input to output. I think the only solution is to customize a universe. This universe can define SACN input and output by itself.

I understand the way you said, but I don't want this kind of physical input to output. I think the only solution is to customize a universe. This universe can define SACN input and output by itself.