I need to make some manual transfers but sometimes, I forgot to keep master fader up.If i start my cue list with master fader down, when I lauch a manual transfer, cue appears on stage with 0 time , on second movement it becomes a go back behaviour and third movement I can make my transfer.Is there a possibility to have a crossfade both ways like Cobalt?
if you change the Master behavior in the Cuelist setting ( Cue Cue ) to "Man" you can always crossfade using the two Master faders.
this setting is active in my cuelist, I speak about the behaviour of master faders when you start your cuelist with faders down
I only see the cue happening in 0 time if the Cue's time is set to 0 seconds - is that what you have? Otherwise, could you make a short video to show us? And we may also need to see your showfile.
it appears on differents shows, I've made a video
Thank you very much for the video. I am having trouble telling if channel 100 is in yellow or green when you fade into cue 4. If it's yellow, maybe you have a sub that is contributing a level to it - check in About.
If not, maybe you could send me your showfile to firstname.lastname@example.org and I can work through it. I couldn't repeat the issue from scratch on my console so I am missing something.
Ok, I sent you my showfile , Thanks for your support
Okay, thanks. I understand the issue better now and will write up a bug report for you. I can also get the issue in v3.1.0, and I can make it happen on other console types if I hold the Motorized Main Playback faders down during startup.