• Date
    willbb123
  • Date
  • Replies 6 replies
  • Subscribers 68 subscribers
  • Views 6755 views
  • Users 0 members are here

Sensor CEM Classic - Hold Last Look

I have a 46 channel Sensor Touring rack with the CEM classic. 

I want to be able so set the Hold Last Look, to hold until I reset the dimmers. I've been able to change the settings on the rack to hold for 999; is there a way to make it hold longer?

Also the pins in the patch bay fit loosely, and slide out easy. Any tips on how to split the pins to make them fit more snug?

Finally can the CEM classic connect to a computer the way that the CEM+ can?

Parents

  • I do not know about spliting them but....Patchbay upgrades to go from odler Anderson pole connectors to banana plugs are available and can be performed at ETC or by the customer.  There is a video available from ETC on how to do this work.  When arranging these kits to ship out, the patch bay must be standard size and shape and we will need to know whether they have a 2 or 4 patch panel.

    Part # for these kits
    7053A1108  PATCH UPGRADE 2-OUT SMALL
    7053A1109  PATCH UPGRADE 2-OUT LARGE
    7053A1110  PATCH UPGRADE 4-OUT SMALL
    7053A1111  PATCH UPGRADE 4-OUT LARGE
    7053A1112  PATCH BASH UPGRADE 4-OUT SMALL
    7053A1113  PATCH BASH UPGRADE 4-OUT LARGE

    One thing to remember about these bays is that there were a number of very early racks that had Hot and Neutral patchbays.  This allowed circuits to be plugged together in series for support of low-voltage ACLs.  These racks are NOT upgradeable

    Please contact ETC Technical Services or your local dealer for help.

    http://community.etcconnect.com/wikis/products/knowledgebase-sensor-patchbay-upgrade.asp

    Sincerely,

    Mike

     

  • in reply to mmeskill

    The patch bay is banana plugs. I was hoping for something simpler then installing a new plug.

    Thanks for the help.

Reply Children
No Data
Related

www.etcconnect.com