• Date
    Dionysus
  • Date
  • Replies 3 replies
  • Subscribers 15 subscribers
  • Views 7844 views
  • Users 0 members are here

Smartbar loosing address

I have a smartbar that has several times lost it's address information. Once I go up and address it, it is fine for quite some time then it will eventually loose it. The smartbar directly beside it has no issue, just the one. At first I thought it was coupled to power loss. It always seemed to happen after when there was a potental loss and when noone was in the building.

Recently it has done it so I am told either right before an event with no real cause.

What could be causing one to loose address and not the other?

What should I do to fix this issue (troublesome to keep addressing it)?

Thanks

Parents

  • Something similar happened to me, though it was a wall mount thrupower module.

    My pack began to respond to Address 1, instead of 501 that it was using prior to that.

    All I did was go back into the menu, select DMX Address, and it was immediately standing by at Address 501. Selecting that, it returned to the address it was supposed to use.

Reply

  • Something similar happened to me, though it was a wall mount thrupower module.

    My pack began to respond to Address 1, instead of 501 that it was using prior to that.

    All I did was go back into the menu, select DMX Address, and it was immediately standing by at Address 501. Selecting that, it returned to the address it was supposed to use.

Children
No Data
Related

www.etcconnect.com