D3 View

I'm guessing you mean a Visualisation package, like Capture Polar.

Any visualisation package that supports Streaming ACN (E1.31), ETCNet2 or Art-Net can be used.
There are many available, ranging in price from cheap to expensive depending on the features you need.

Having chosen your visualisation program, you'll need to install it onto your computer (the same one or another connected via Ethernet) and run it at the same time as Congo Offline.

To allow your Congo Offline to control the visualisation, go into System Settings > Protocols then turn on "Output in Offline Mode" and the network protocol your visualiser supports.

Thank you . I will look into that ... 

Do you have any recommendation . I just need to visuals I my show ..

Thank you . I will look into that ... 

Do you have any recommendation . I just need to visuals I my show ..

I've used Capture Polar quite a bit - they have a free demo version (no saving, times out after an hour) you can download to try it out.

They have several different editions at different price points - including a free student edition.

I just did the download . now just figure out how use it..

maybe this will help (not about using capture, but about connecting it to congo/eos): wiki

I can't connect my software to the visualize..   i did everything as the link about . ut wont connect ... help please .. what i"am doing wrong ..? 

How are you running the console and visualiser?
Are they both running on the same PC or different PCs?
Which operating system?

I know it sounds obvious, but did you patch your lights?

They must be patched in Congo and in Capture.

• If you don't patch anything in Congo, it does not output anything because there's nothing to say.
• If you don't patch your lights in Capture, they will not come on because they are 'unplugged.

Look in Capture's Universes list, do you see anything in External Universes?

If not, make sure that "Streaming ACN" is turned on, "Enable Output in Offline Mode" is ticked and you have chosen the same network card in both Congo and Capture.

You will also need to ensure that any firewalls allow both these programs to talk.

I'm running  the console and the visualiser  at the same computer, i'm using Mac 10.6.8 .

they are patch in my console . but not in the visualizer, I'm  trying  to connect my console to the visualizer frist.

no external universe are showing ..

the Streaming ACN / Enable output.. is on ..

Thanks for the update. I now see that you are running Congo Offline on a Mac. Unfortunately, there is currently no support for output to visualizer in the Mac version. 

owww. I see ... i do have a Pc . so i;m going to try on Pc ..

But can i run the Offline on Mac and visualizer on Pc  or they both must be in the same system ?

Thank you .. 

You will need to run Congo Offline on your PC, as Mac Congo Offline doesn't support visualiser output at this time.

Capture can run on either the Mac or the PC, it doesn't matter which.

If Capture is running on a different computer to Congo Offline, you just need to make sure they are both on the same network.

okay .. i got  Now i'm in the process of Patching my unites to the Visualizer .. 

and i ran some test and Realized that my dynamic Fx (fucos) are not working in the Visualizer.. is that something that i need to .. ??

Can i Import the training Image from the console to the Capture visualizer or i must create a new one ..