• Date
    Sarah
  • Date
  • Replies 19 replies
  • Subscribers 67 subscribers
  • Views 27672 views
  • Users 0 members are here

Scroller Calibration Editor

I have a question about the scroller calibration editor.  We’ve noticed that when for whatever reason we need to re-calibrate a scroller after presets are written, the preset does not reference the new calibration, but retains the level it was when the preset was originally written.  We then have to go back into the preset and change the level there.

 Is there any way to make the preset reference the updated calibration much like it would with an updated palette?

 Thanks

Parents

  • Hi Sarah,

    The best way I have fount to do this is re calibrate all your scrollers, the re-call your group hold Colour and go to each colour with direct keys and press update Pallet. If not do it the long way and go to pallet editor and select the column and re do it to your new scrollers Calibration.

     If your recording by just scoller Col Direct keys this should auto update presets when you re do your calibration.

    Hope this makes sense it does in my head. Im sure this is a long way to do it as well, but someone like Richard or ETC Sarah might tell us a faster way to do this.

    Carl



    [edited by: cknapper at 10:10 AM (GMT -6) on Fri, Jan 18 2008]
  • in reply to cknapper

    Unfortunately scroller calibration isn't referenced data, so there are no shortcuts to propagate scroller calibration data through the recorded Presets.

    Carl's suggestion of updating the calibration, and then updating your colour palettes in turn is currently the best method available.

Reply Children
No Data
Related

www.etcconnect.com