• State Suggested Answer
  • Date
    menelaos
  • Date
  • Replies 8 replies
  • Answers 2 answers
  • Subscribers 67 subscribers
  • Views 5114 views
  • Users 0 members are here

CONGO 2 QUESTIONS

Hi there,

I am having three questions that I can not find the answer by my self.

1)Link to step. Lets say that I place a link to step 1 to my current step that is 4. How can I make the desk to play this exact loop for 3 times and then to stay on step 4  so  (when the three time loop ends) as soon as I press go it will go to step 5?

 

2)Chases. I just want to record a chase to a Master. The go Button will trigger that chase and as soon as I press the flash button I want to see the current step of the chase. What I mean is that I want the chase to play on the background and as soon as i press the Flash button I want to have Intensity on. I tried several ways such as creating the chase manually as a sequence or even creating the chase as an effect playback. Neither worked. I also set the flash button to control Intensity only. What happens all the time is as soon as I press the flash button the chase starts from the first step. 

 

Thanks

 

Parents
  • 0

    Q2) I made a normal Sequence of 4 steps . wait times on each step . Step 4 was linked to step 1.  when it runs it cycles through each step continuously. Put that sequence on a Master and raised the Master just above zero. Master button was Go/Pause and flash button was momentary.

    With the fader just above zero and pressing 'Go' the sequence runs and hitting the flash button whenever you fancy brings up the intensity wherever the sequence happens to be

    Probably not the classiest way possible but it might do what you're after

     

  • 0 in reply to Andy F

    Hi Andy,

    Although is a solution, thats not the best thing for me. I am mostly working to Concerts and due to the hardware of my Congo JR Master Wing  (the flash button is above the fader) I can easily fade out the fader by mistake. Also most of the times it's a Pain to create Seq chases and most of the times I am using Playback Effect Chases. Unfortunately, I don't think there is any other way of doing it than the one that you are proposing here.

     

    Thanks anyway!!!!! 

  • 0 in reply to menelaos

    You can just record the master @ 1% in your preset, so you won't have to move the fader at all.

     

    creating seq chase is very easy. Create a new seq, insert or create new presets, then change it to a chaser in the seq page. 

Reply Children
No Data
Related

www.etcconnect.com