slowing movers down

hi ya. i was wondering if anyone could help. I ve plotted some movers in to a cue, and they are moving around, however i want to change the speed at which  they are moving, how is it possible to do this?

thanks

Not quite, but close!

There are a couple of ways to do this:

• First, check that Set Times To is the way you like it:
• "A" - current cue
• "B" - next cue
  
• Type a number (in seconds), hold [FOCUS] and hit [TIME]
•  This sets all pan/tilt movements in the chosen cue to use that time.
• You can also use [FOCUS] & [DELAY] for delays, or use [COLOR] or [BEAM] in place of [FOCUS] for those attributes.
  

Alternatively you can use the Times Editor:

• Hold [MODIFY] and hit [TIME]
• Make the changes you want!
  
• You can open a list of individual attribute timings from here if you want to make particularly complex moves.
  

Not quite, but close!

There are a couple of ways to do this:

• First, check that Set Times To is the way you like it:
• "A" - current cue
• "B" - next cue
  
• Type a number (in seconds), hold [FOCUS] and hit [TIME]
•  This sets all pan/tilt movements in the chosen cue to use that time.
• You can also use [FOCUS] & [DELAY] for delays, or use [COLOR] or [BEAM] in place of [FOCUS] for those attributes.
  

Alternatively you can use the Times Editor:

• Hold [MODIFY] and hit [TIME]
• Make the changes you want!
  
• You can open a list of individual attribute timings from here if you want to make particularly complex moves.