Sola Frame 1000 Recalculate FPE SET

It is worth checking that there is not a * next to fixture type in Patch, that will indicate you are using an older version of the fixture. The current fixture has a tilt range of -134.6 > 131.8 which takes account of the beam exiting the unit asymmetrically. 

Also as @starksk mentions, a small error in the centering of the beam can make a significant difference to the calculations. In general if you know you fixture is accurately positioned, you may be better off setting the position manually as you have done. FPE is primarily designed to discover or correct positions when they are unknown or inaccurate.

ciao 

the last Fixture Library version is not 3.0.0.138? in this version teh tilt range is -132.5>132.5

I think you are referring to the previous version - Fixture Library 3.0.0.134

any way thanks for the help.

Huh. You are totally right, it went from the values I mentioned to 132.5. I would make a guess that was a mistake, having used these units and myself calculated values very close to those in 3.0.0.134 I would trust those values over those in 138.

Huh. You are totally right, it went from the values I mentioned to 132.5. I would make a guess that was a mistake, having used these units and myself calculated values very close to those in 3.0.0.134 I would trust those values over those in 138.