Im trying to design a show utilising lots of Showtec Q4 Festoonlight.
I see The Chauvet festoon in the system currently exists but the A3D model reacts nothing like a festoon light should. Is there a way I can edit the existing model to make it react more realistic, or failing that is there a model/fixture for a singular RGBW lightbulb shape that I can use instead?
See image of current festoon light spread.
Thanks,
starksk Thanks for the response! Is there an omnidirectional lamp that's not RGB (eg just a straight-up 'lightbulb')? Or, failing that, is there a way to edit the 'edge'? So far, (apart from moving lights with a zoom/edge), it seems like all fixtures (under patch -> fixtures -> physical data) result in an identical look on stage --
See attached picture - In this example, I have 42 bare lightbulbs hanging at various heights in the space - note the shape of the beam where it falls on the stage - it is always a fairly narrow, sharp-edged circle, regardless of whether you select a practical, a pendant, or a fluorescent.
This is now possible, but might need a little bit of work from your side:
In the library you can find a Pulsar Chroma Sphere. This will give you a RGB sphere. If you only want it to have fixed color you can edit this fixture profile to only have Intens. If you don't like the color you can gel it in Patch > Database.
Does this help?
