Copy to and MTC

Would you really want two cues to be triggered from the same time code?
In most scenarios you are creating a new cue because it is being triggered by a different time.

It is also worth mentioning that the timecode displayed on a cue in the Playback Status Display is representing the data stored within the Event List. Each event within an event list can only trigger a single action.

To trigger two cues at the same time via the timecode is possible either by two event lists or executing one cue from the other or a macro triggering both cues...

Would you really want two cues to be triggered from the same time code?
In most scenarios you are creating a new cue because it is being triggered by a different time.

It is also worth mentioning that the timecode displayed on a cue in the Playback Status Display is representing the data stored within the Event List. Each event within an event list can only trigger a single action.

To trigger two cues at the same time via the timecode is possible either by two event lists or executing one cue from the other or a macro triggering both cues...

Hi.

 I have the same day with different schedules, two different musical-theater functions, but in each of them two tracks of music are repeated .... for the 1st theater function I created cue list 1 with the MTC for the track of music ... for the second theater function (different) (but the track is repeated) I do not want to link the cues list, I want to create a cue list 2 and copy the MTC that is already in the cue list 1 .....I just want to copy the MTC code (shooting times) from a cue list and paste it into another cue list .....And apparently this is not possible …….

 Thank you for your contribution.

This is possible another way.
Copy the Event List to List 2. You can then select all the events and say Cue 2/Enter.

This will turn Event List 2 into using Cue List 2.

Thanks Nick.
I'm having trouble understanding ... please could you be more explicit .... doing it as I think you say what I get to shoot the cue of the second cue list that I do not want to enter because it is so another show

You will have Event List 1 in Tab 11.
Use the following in Tab 11.

1/ Copy To 2/ Enter.
This will copy the list so you have Event List 2 with Cue List 1 cues in it.
In Event List 2.
2/Enter if you are not in this list.
1 Thru Enter (this should select all your events in list 2).
Cue 2/ Enter.
This will change all the cues in Event List 2 to Cue List 2.

Hope this helps.

Uuffs!.....[C][+o(]

I write....

In tab 11 (show control); Event 1/ Copy To Event 2/ Enter

Event 2/ Enter

1 Thru Enter = (Event 2/1 Thru 6 Enter) Because there are 6 events created...

Cue 2/ Enter auto-write on the command line .... (Event 2/1 Thru 6 Cue 2/2 Enter)

Result....

Are you happy that works?
To see the Timecode in Cuelist 2.
Cue 2/ Execute Timecode 2 Enter.

Yeees ....[:D]     achieved. It's a big help .... is there anything that can not be done in EOS?

Thank you very much.  [8-|]