Touch OSC+ Gio+iPad+3 Access Points = 2 Different Behaviors

Hello Guys,

I have a problem with my OSC Gio Network combination. I have Touch OSC with the Standard Guitar Hub Sheet ( not changed and set up like description). The problem is, that, when I use my Access Point near the console, I get response like labels for faders, or for the command line, but when I use another AP, the console reacts as it should but there is no visual response on my iPad screen.

Here my config:

-ETC GIO 2.5.?

-iPAD 2 Air latest OS

-HP Switch

-3x Access Point ( 3 different types)

-Ethernetcable CAT7

The only difference I see at the moment, between the APs, is their own IP-adresses and possibly the standard Gateway-IP in the single Wificonnectionsettings.

 

Is this a known problem, or does anyone have an idea, where the problem could be? Here a sketch of my Network.

 

https://www.dropbox.com/sh/eib2oclu1mx56ik/AAAaHIjYz5zp419BPBTG7mola?dl=0

 

Thanks, Dominik

Related