• State Not Answered
  • Date
    PK-Bomber
  • Date
  • Replies 1 reply
  • Subscribers 90 subscribers
  • Views 2246 views
  • Users 0 members are here

Touch OSC+ Gio+iPad+3 Access Points = 2 Different Behaviors

Hello Guys,

I have a problem with my OSC Gio Network combination. I have Touch OSC with the Standard Guitar Hub Sheet ( not changed and set up like description). The problem is, that, when I use my Access Point near the console, I get response like labels for faders, or for the command line, but when I use another AP, the console reacts as it should but there is no visual response on my iPad screen.

Here my config:

-ETC GIO 2.5.?

-iPAD 2 Air latest OS

-HP Switch

-3x Access Point ( 3 different types)

-Ethernetcable CAT7

The only difference I see at the moment, between the APs, is their own IP-adresses and possibly the standard Gateway-IP in the single Wificonnectionsettings.

 

Is this a known problem, or does anyone have an idea, where the problem could be? Here a sketch of my Network.

 

https://www.dropbox.com/sh/eib2oclu1mx56ik/AAAaHIjYz5zp419BPBTG7mola?dl=0

 

Thanks, Dominik

Parents
  • 0
    If you are using multiple access points that are independent from each other the console will not know what the correct route is to get the packets back to your iPad.
Reply
  • 0
    If you are using multiple access points that are independent from each other the console will not know what the correct route is to get the packets back to your iPad.
Children
No Data

www.etcconnect.com