I've been thinking for a while about how to do this and drawn blanks so maybe someone here has a solution or can point me in the right direction?
Essentially I would like a RPi or Arduino sitting on the network, which displays incoming OSC packets from an IP address as a readable Q Number on an interface (looking at /eos/out/cue/xx/ presumably). I've thought about TouchOSC on an iPad or Android, but would prefer to use the RPi/Arduino sitting around as they're also cheaper.
Any thoughts / suggestions would be appreciated
Hello, sorry I've just seen this. I successfully managed to develop this using a RPi and the Official RPi touchscreen. Sadly don't have any photos of the finished product as I left that job…
Have you figured out how to do this? I think it would be cool to have a monitor for my spotlight ops.
I while ago I thought about this project. Maybe I will have a deeper look in it. You will need an Arduino with an Ethernet Shield and some 7-segment displays.
I added a simple "cue box" example on my GitHub site https://github.com/sstaub/eOS-USBIt is based on the original box 1 and displays cue data and also have a GO and BACK button.