I've been thinking for a while about how to do this and drawn blanks so maybe someone here has a solution or can point me in the right direction?
Essentially I would like a RPi or Arduino sitting on the network, which displays incoming OSC packets from an IP address as a readable Q Number on an interface (looking at /eos/out/cue/xx/ presumably). I've thought about TouchOSC on an iPad or Android, but would prefer to use the RPi/Arduino sitting around as they're also cheaper.
Any thoughts / suggestions would be appreciated
Hello, sorry I've just seen this. I successfully managed to develop this using a RPi and the Official RPi touchscreen. Sadly don't have any photos of the finished product as I left that job…
It should possible on both platforms. There are OSC libraries for both platforms. The main difference is that a Raspi have an OSand also network hardware (WIFI, LAN) on board. With an Arduino you must do many things with hardware (adding LAN/WIFI boards and displayhardware), but it is very fast, you don't need booting an OS...Have look to the lighthack project.