sACN and DMX patch issue

I have an ETC Ion console in one of our rooms.  We were having issues with 1 of 8 moving lights we've had plugged in and wired since 2010.  The one we're having issues with is near the middle of the linked fixtures, not at the beginning or end of the series.  So looking at the patch screen, that fixture show a  " + "  in the sACN and DMX columns, not an asterisk like all the other ones.  It's the first time I've seen that.  Anybody know what that means?  I don't see it in the manual, or at least I haven't come upon it yet.  Thanks in advance!

Parents
  • Is it actually not working anymore or have you just noticed the difference? Asterisk means that the respective protocol is active because you selected Standard and this protocol is one if the standard protocols. Plus means that you actively selected the respective protocol.

    Regarding output it shouldn't make a difference. As long as the column has either an asterisk or a plus that have that the protocol is active

Reply
  • Is it actually not working anymore or have you just noticed the difference? Asterisk means that the respective protocol is active because you selected Standard and this protocol is one if the standard protocols. Plus means that you actively selected the respective protocol.

    Regarding output it shouldn't make a difference. As long as the column has either an asterisk or a plus that have that the protocol is active

Children
Related