Is it possible to add the ability to request cue names using cue list / cue number
for example
/eos/out/get/cue/1/1/label
or similar
Is it possible to add the ability to request cue names using cue list / cue number
for example
/eos/out/get/cue/1/1/label
or similar
Eos will send all the time the cues and its Labels.
see right here while i hit Go:
and the cuelist for this:
-
And if you have a look in the EosFamily_ShowControl_UserGuide_RevC.pdf, starting from page 72, you will find your 'get' with all the information of the requestet cue-information.
Maybe this is a little bit helpfull.
this does work, but only if you run the cue, i want to be able to just get the cue label
and the get on page 72 is more complicated than what i was looking for and requires multiple steps
Regarding the Manual on Page 69, a simple
/eos/get/cue/1/11
will give you a quite nice and short information.
As you can see here
you still need to filter your information from the answer. But it is quite obvious for the naked eye
Regarding the Manual on Page 69, a simple
/eos/get/cue/1/11
will give you a quite nice and short information.
As you can see here
you still need to filter your information from the answer. But it is quite obvious for the naked eye
www.etcconnect.com