Tiny Cue Durations Very Slow


If I set 30 cues with a duration of .01 seconds all with Hang 0's, when I say Go to Cue 1 Time Enter, they should all be complete in about .3 seconds. Instead, it takes more like a couple seconds to get to the bottom. Why? How do I fix it? I need it to at least get through 30 a second taking exactly 1 second. No matter how small I set the duration, it seems to be capped at a very slow pace.

Best regards

Jordan Henshaw

Parents Reply
  • Because I can make a mover draw a unicorn.
    Because I can spend an hour finessing the fine details of a single flash interpolation
    Because I can dynamically map mover pan/tilt to a dancer's arm movements in 1 minute
    Because I can design extended sequences with non-repeating, unbroken, fluid lighting choreography
    Because I can think exclusively in terms of organic design, not in terms of programming

    Just need a way to accurately store the data onto Eos so my software doesn't have to be running during the show. A cue with duration of .01 seconds must last .01 seconds.