Midi Show Control Event not working

Managed to get the Midi Note Event working with the setting above. Midi-Ox I changed to have only Midi Ouput.

In Nomad this meant disabling the MSC Transmit, as Cue 2 never completed - saw the timing continuously rolling and never completing. If anyone could explain I'd be grateful.

Thanks everyone for your help. You're stars.

Managed to get the Midi Note Event working with the setting above. Midi-Ox I changed to have only Midi Ouput.

In Nomad this meant disabling the MSC Transmit, as Cue 2 never completed - saw the timing continuously rolling and never completing. If anyone could explain I'd be grateful.

Thanks everyone for your help. You're stars.

Congrats!

Midi Show Control (MSC) sends the information that Cue 2 was fired. All connected MIDI devices that are listening to MSC will then fire their cue 2 as well. Since your MSC Rx (receive) is active, your console is reacting to that as well, essentially creating a feedback loop.

Thank you. I thought it might be something like that.

When I set this up 'for real' - i.e. Midi out from our sound desk to Midi In on the Ion, this should not occur as I will not be connecting the Ion Midi Out back to the sound desk?

TIA.