Cutting to cues

Hi Brent,

for "cutting" to/thru Qs, it is possible to disable the timing of a Playback:

Press & hold [Timing Disabled] and the [Load]-key of the playback

"TD" will be displayed; this state remains until you release TD (as above).

What I am missing is a way to "cut" to the next Q only (without having to set/release TD or play with the faders); feature-wise maybe a cut-command could be like

[Timing Disabled] & [GO]    ????

Cheers, Markus

In 1.3, if you hold down [Timing Disable] and press [Go] or [Back], the cue will cut in. The playback only goes in to timing disabled mode if you press and releae [Timing Disable] without pressing go or back while it is down.

The resistance on the playback that you feel when you move it down then up, is suppossed to indicate the progress of the current fade. In 1.3 we removed that resistance though, so now it will be a more smooth transition.

 In 1.2, you could also move the playback to 0, press go and then move the playback up to full. Presetting the slider to 0 before pressing go captures the fade for manual control.

Hi Anne & Dan,

Thanks a lot !

M.

Yeah Ditto!  Thanks All.

B

I know David already wrote this down but I'm gonna state it here too (since you have a thread started and everything).

 I tried to make a macro to do the above operation (Time Disable, Choose Fader, Step Back or Forward, Time Disable, Choose Fader), and it went crazy (stepping forward or backwards several cues).



 

I know David already wrote this down but I'm gonna state it here too (since you have a thread started and everything).

 I tried to make a macro to do the above operation (Time Disable, Choose Fader, Step Back or Forward, Time Disable, Choose Fader), and it went crazy (stepping forward or backwards several cues).



 

Jason.... yes, there seems to be a bit of difficulty with macros that involve double press commands.   We are working on it and hope to have a solution shortly.

Thanks for putting it on record!

 Anne