Patching

Hi,

you can write Adresse(soft key) 1 @ 5 Enter

Now the DMX-Adresse 1 give you a output with 50%.
When you claer the command line, you have no output.

Now you can search the device and patch it.

hope that helps

Mike,

Is there a way to move through DMX addresses using the next and last keys like with the channel check feature?

For example, Channel 1 @ 50%; press next to illuminate next light and extinguish previous light simultaneously.

yes you can syntax would be Address "1" @ 50 enter then you can next and last from there and it should do the next address in line.

Because your bringing up addresses every time you either clear the cmd line or hit next or last, the current address will go out and bring up your next Address without the need of specifying Channel check for regular patched channels. 

yes you can syntax would be Address "1" @ 50 enter then you can next and last from there and it should do the next address in line.

Because your bringing up addresses every time you either clear the cmd line or hit next or last, the current address will go out and bring up your next Address without the need of specifying Channel check for regular patched channels.