Calllibrate strollers by address

Hi Michael,

If you go into Patch > {Fixtures} and copy your existing Scroller fixture, then go to {Edit} and select the Scroller parameter. Hit the {Parameters} key, then under Color you will see a 'Scroller 2' parameter. Select this.

You can then label that fixture as something like 'Scroller 2'. If you apply this to part 3 of your channel in patch, you will then gain the ability to have a second individually controllable scroller for that channel. You will need to have individual addresses for each scroller at this stage however.

Hope that's a help.

Dan

Hi Daniel,

Just saw your post, and that show has since ended---

That said, your suggestion is the most logical, simple solution suggested (I will definitely try it in the future)!  Thanks!

MM

Hi Daniel,

Just saw your post, and that show has since ended---

That said, your suggestion is the most logical, simple solution suggested (I will definitely try it in the future)!  Thanks!

MM