Issues with Multiple Intensities in Custom Fixtures

ldsfx said:

1. I have have created a custom fixture with 11 intensity attributes (Mapped as Intens, Intens 2-8, Intens 11-13). Two of these paramaters have been defaulted to 128 in the patch screen, and are outputting that (under the ABOUT), however the encoders still show 0.125%, the percentage does not seem to update proportionately, and the granularity of the encoders does not seem to match across the fixture.

i think for the parameters that show 0,125% you should go to patch, to the fixture list and check the range in the personality. i think you will see, that the dmx values range from 0 to 255, but the User Min and Max are set to -100 and +100. which makes 128 (which is almost center) 0,125% (which is almost center too).

ldsfx said:

1. I have have created a custom fixture with 11 intensity attributes (Mapped as Intens, Intens 2-8, Intens 11-13). Two of these paramaters have been defaulted to 128 in the patch screen, and are outputting that (under the ABOUT), however the encoders still show 0.125%, the percentage does not seem to update proportionately, and the granularity of the encoders does not seem to match across the fixture.

i think for the parameters that show 0,125% you should go to patch, to the fixture list and check the range in the personality. i think you will see, that the dmx values range from 0 to 255, but the User Min and Max are set to -100 and +100. which makes 128 (which is almost center) 0,125% (which is almost center too).