i need to learn to control the gio in days, please help

Hej, I m sorry to ask questions the 15th time, but unfortunatly, I don't have time. At work is no Inet connection, so I have to ask, before I get to sleep at hotel. I have to learn the Gio in a few days, because there is no Gio at the venue yet. I'm sorry, but in my case is the search function is not the best way. so I have a little catalogue of questions and I m very thankful for everybody who helps me.

At the moment I work with the "Transtechnik Focus NT", so I would be very thankful for helping me with the conversion. Here are my questions:

1) "L" "Cue X": Loading Cue without time! On Gio possible?

2) "GO" "Cue X": Load "Cue X" in programmed time and load next cue for shooting it! On Gio possible?

3) "Cue X" "HRT": Load "Cue X" without time and load next cue for shooting it! On Gio possible?

4) When I work in the Blind Sheet, can I play cuelists parallel, like I m in Live Mode?

5) Is there something similar to the Transtechnik "Single choice" and "Group choice"? Means (single:     "1""enter""2""enter" 2 is selected) (group: "1""enter""2""enter" 1 AND 2 are selected)

6) Several curcuits have itensities, I m in a cue. I want to pick one channel, and kill the rest, so I can better see it. When it s focussed, I want to go back to the cue. In Transtechnik language would it be: " "Curcuit X" UEB ISO"

7) Same Scene like above, but Itensities dont come from a cue, but from several Submasters. But I want to check one of it. So I have to kill the rest. In Transtechnik language would it be: "GRP X UEB Solo"

8) When I change a intensity in a live cuelist manual and it moves red and I go to the next cue, how do the intensities behave? Change like next cue, or stay like manual control?

 

Many thanks to everybody, how wants to help!!!

Parents
  • 1: see No. 3
    2: GotoCue x Time Enter
    3: GotoCue x Time 0 Enter (or you go to Setup and change the default GotoCue time to 0, then you can do GotoCue x Enter
    4: yes. only two places where you can't press go (i think): Fader Config tool in Setup is open, and if you are saving the showfile and the onscreen keyboard is open.
    5: no
    6: x Highlight Enter. to have the same behaviour like NT (the highlighted fixture leaves the color untouched) you will have to use a Highlight Preset. i suggest reading this up in the manual. same for the Lowlight Preset, for Highlight Enter, for RemDim Enter and for Highlight RemDim Enter
    7: i don't think you can check the Sub as such, but you could use what you know as BSW: Group Sub x Highlight Enter and then use Next and Last to navigate through the Selected channels
    8: they will move if there is a MoveInstruction in the next cue, unless you keep the red channels selected or use Capture (and don't think that just because you're in CueOnly mode that there is always a MoveInstruction ;) ).

Reply
  • 1: see No. 3
    2: GotoCue x Time Enter
    3: GotoCue x Time 0 Enter (or you go to Setup and change the default GotoCue time to 0, then you can do GotoCue x Enter
    4: yes. only two places where you can't press go (i think): Fader Config tool in Setup is open, and if you are saving the showfile and the onscreen keyboard is open.
    5: no
    6: x Highlight Enter. to have the same behaviour like NT (the highlighted fixture leaves the color untouched) you will have to use a Highlight Preset. i suggest reading this up in the manual. same for the Lowlight Preset, for Highlight Enter, for RemDim Enter and for Highlight RemDim Enter
    7: i don't think you can check the Sub as such, but you could use what you know as BSW: Group Sub x Highlight Enter and then use Next and Last to navigate through the Selected channels
    8: they will move if there is a MoveInstruction in the next cue, unless you keep the red channels selected or use Capture (and don't think that just because you're in CueOnly mode that there is always a MoveInstruction ;) ).

Children
No Data
Related