• State Suggested Answer
  • Date
    litedesign
  • Date
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 184 subscribers
  • Views 1606 views
  • Users 0 members are here

Activate effects and NIPs immediately on Sub

I have a sub that takes all my moving lights, puts them in a preset, brings up their intensities, and places them in a ballyhoo effect. How can I configure the submaster to fire everything at the same time (effects, intensity, and positions) when I either hit the bump button, or move up the fader? Basically, I don't want to have to hit both the bump button AND the bring up the fader to recall the look.


[edited by: litedesign at 11:39 AM (GMT -6) on Tue, Sep 3 2013]
Parents
  • 0

    Currently that is a little difficult.

    One method I use is to set the Sub as an IM fader.   Preset the Fader to 100%.   Here's the trick - derive ALL of the INT information from an Effect.  I make simple little step effects  that bring things up with their specific timing.

    Now when you hit the bump button it will treat the Intensity information as a NIP - and everything will fire at the same time.

    The nice thing is you can still use the Fader to bring the look down in INT.

Reply
  • 0

    Currently that is a little difficult.

    One method I use is to set the Sub as an IM fader.   Preset the Fader to 100%.   Here's the trick - derive ALL of the INT information from an Effect.  I make simple little step effects  that bring things up with their specific timing.

    Now when you hit the bump button it will treat the Intensity information as a NIP - and everything will fire at the same time.

    The nice thing is you can still use the Fader to bring the look down in INT.

Children
No Data
Related

www.etcconnect.com