Eos-Family (ION) - Function for ML's Move before go On!!!

With Automark, which is in the Setup, moving lights will move in the cue before the fade in

I'd encourage using Automark for this as well - but if you really, really want to avoid using it (???), you could always go through your cue lists, tracking positions to hold to suitable cues before changing, then staying there until active. A less time-consuming option than that is to manually mark your cues (for thisto work the Automark function  has to be disabled though), which has the benefit of choosing your marking locations, but has a larger probability of breaking your marks with later revisions - as in, you mark cue 3 to move during cue 2, then later add a cue 2.5 with those fixtures at differing values, breaking your manual mark. I think the cue gets a "m*" flag to indicate the broken mark at that point, but it's been a while, and I'm not at my console... And later revisions would mean reworking the manual tracking method, too, so manual entry really has very little benefit.

Hey,

first thanks for the responses.

Unfortunately that is not the function which I looks up! - I use already autoMarks!

I set however now subsequently the intensity values to 0 and the Moving Light get nevertheless to the position. This should they however if possible not!!! Super would be if the console this position now ignored!?

Thanks a lot!

Andre

Ah, this is not how Automark works... To achieve what you want, you would have to clean up your showfile and remove the unwanted move instruction, so you have only tracked values in between...

yes - that's which I made. I wanted this step however in the future to go around. this lasted approx 1 h!!! (24 Moving Lights - 64 Cue's)

when programming your fixtures remember that it is a tracking console.  If you change a position and update it cue only then it will move as it goes out.  Non Intensity parameters generally want to track and not be recorded or updated cue only....