Eos-Family (ION) - Function for ML's Move before go On!!!

Hey,

first thanks for the responses.

Unfortunately that is not the function which I looks up! - I use already autoMarks!

I set however now subsequently the intensity values to 0 and the Moving Light get nevertheless to the position. This should they however if possible not!!! Super would be if the console this position now ignored!?

Thanks a lot!

Andre

Hey,

first thanks for the responses.

Unfortunately that is not the function which I looks up! - I use already autoMarks!

I set however now subsequently the intensity values to 0 and the Moving Light get nevertheless to the position. This should they however if possible not!!! Super would be if the console this position now ignored!?

Thanks a lot!

Andre

Ah, this is not how Automark works... To achieve what you want, you would have to clean up your showfile and remove the unwanted move instruction, so you have only tracked values in between...

yes - that's which I made. I wanted this step however in the future to go around. this lasted approx 1 h!!! (24 Moving Lights - 64 Cue's)

when programming your fixtures remember that it is a tracking console.  If you change a position and update it cue only then it will move as it goes out.  Non Intensity parameters generally want to track and not be recorded or updated cue only....