swap pan/tilt bug

Hi there

I have discovered a pan/tilt bug when you swap pan/tilt and do a focus change to only one of the parameters the other one goes to zero during playback and jumps into position when the cue is done. When you look in about with the channel the value and abs looks fine but the DMX value goes to 0 (0,0) during playback.

Anders Kjems

Parents

Kjems over 11 years ago

I just tried to start a new show and there is no problem (v. 2.1)

I have attached my showfile if somebody will have a look at it.

Anders Kjems

Rovdyr1812 2014-01-02 12-05-27.esf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Kjems over 11 years ago

I just tried to start a new show and there is no problem (v. 2.1)

I have attached my showfile if somebody will have a look at it.

Anders Kjems

Rovdyr1812 2014-01-02 12-05-27.esf
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

speterson over 11 years ago in reply to Kjems

I am seeing this oddness in your show file and will look into it further. Thanks.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speterson over 11 years ago in reply to speterson

Yes, there is bug with Swapping Pan and Tilt. We have it marked to be fixed in the next release.

It's not the best work around, but it works. If you edit the parameter that you want to track by 1 DMX value then the cue will execute correctly. If both parameters have a move, then they won't snap.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel