• Date
    Juan Carlos STONEX
  • Date
  • Replies 14 replies
  • Subscribers 190 subscribers
  • Views 9706 views
  • Users 0 members are here

Select channel level in all the cues

Dear Friends,

I wanted bring 10% up a channel on all the cues it is being used. I tried to do this in Blind Spread sheet and it seem to work, but when a channel is tracking at 0% it takes its level at 10% (this is not what I wanted). I know I can do it manual cue by cue, but when you have 300 cues as we have in some productions, this gets a bit boring.

This is a common petition from some of our designers.

Thanks a lot

Parents

  • If you want a true 10% on all values, do what is suggested. If you want it 10%brighter than what it was you can go to blind, cue 1 thru enter, channel @/110enter. That should bring it 10% brighter, so if at 90 to 99 if at 80 to 88 etc. Not positive it works, but worth a try.

Reply

  • If you want a true 10% on all values, do what is suggested. If you want it 10%brighter than what it was you can go to blind, cue 1 thru enter, channel @/110enter. That should bring it 10% brighter, so if at 90 to 99 if at 80 to 88 etc. Not positive it works, but worth a try.

Children
No Data
Related

www.etcconnect.com