Pixel Mapping dimmer curves

We have been running a wall of 60 Jarags as a pixel map. Is there a way to adjust the dimmer curve on individual units within a pixel ch? I am able to adjust when I use them as channels but unable to adjust when using as a pixel map ch.

 

FYI this means 1500 light globes with very slow fades are coming up all over the shop.

 

Thanks

 

D

Parents
  • The pixel map outputs don't respond to curves - at least in my experience.

    I've done a few of these on a fairly large scale.  Low level granularity has never really been an issue with incandescent.

    LED can be a different story..... 

  • Hi Patrick, thanks for your response. Yes the Jarag units are running different dimmer cards, as a result they do look pretty bad fading up. This really requires ETC to look at how pixel channels can reference the dimmer curves applied to multiple fixtures that make up the pixel ch. 

     

    Take care

     

    D

     

     

     

  • DC LX said:
    Yes the Jarag units are running different dimmer cards

    Ah... I see.  How many different card types are you looking at?

    Try building your pixel map and duplicating it 3 or 4 times (depending on how many "flavors" of lights you have)

    Assign different Server layers to each instance of your map and then delete units from each map so that Map 1 has only flavor 1, map 2 has favor 2, etc. etc.

    Now apply your curves to the server channels in question.

Reply
  • DC LX said:
    Yes the Jarag units are running different dimmer cards

    Ah... I see.  How many different card types are you looking at?

    Try building your pixel map and duplicating it 3 or 4 times (depending on how many "flavors" of lights you have)

    Assign different Server layers to each instance of your map and then delete units from each map so that Map 1 has only flavor 1, map 2 has favor 2, etc. etc.

    Now apply your curves to the server channels in question.

Children
Related