Issues with existing profiles

Hi, I just wanted to follow up on the post on the 24th Oct in regards to the Mac Quantum Wash. Am I reading your reply correctly in that EOS is currently unable to handle the 3 rings in the fixture properly? We did the same thing of changing the profile to give us access to the 3 rings. But this has proven to be quite cumbersome in practice. To make the fixture red requires scrolling thru the colour pages or ML controls to find all of the red attributes. The colour picker doesn't apply to the extra rings, only the first. The effects only apply to the first ring as well. Is there a better way around this? Also found that the Zoom is set to step, snapping from min to full unless holding shift. Cheers for your help Rob

At this time Eos only has one color picker per fixture- so patching each ring as it's own fixture or creating Red 1 Red 2, etc is the best solution. I am sorry for the inconvenience.

At this time Eos only has one color picker per fixture- so patching each ring as it's own fixture or creating Red 1 Red 2, etc is the best solution. I am sorry for the inconvenience.