• State Not Answered
  • Date
    Stacy
  • Date
  • Replies 3 replies
  • Subscribers 183 subscribers
  • Views 2523 views
  • Users 0 members are here

Replace With problem

I'm running software version 2.1.2 and I think there is a random fault with the Replace With softkey.

In Blind (spreadsheet view) I can replace most things but while trying to change a Shutter Strobe value of 15 to 255 it fails every time. It takes the syntax but does nothing. I'm doing this because of some fixture swap outs old unit Open Shutter was 15 new one in 255, I've been able to use Replace for many other things such as zoom as a direct change and also CP changes in cue ranges.

Is it something I'm doing wrong or is this a fault?

Stacy/Stuart 

Parents
  • 0

    Problem solved but it did show up another issue.  The problem persisted once on a desk and not the offline, but being on a desk if i looked at the encoder for the Shutter Strobe i had a different value!

    So in either the Table view or Spreedsheet view the column for Shutter Strobe showed 15, but the encoder showed 30. So when i retried the command line using [channel selection] Shutter Strobe 30 Replace with 255 it worked perfectly.

     

    So the new issue is having one value on the encoders and another on the Live/Blind display!

Reply
  • 0

    Problem solved but it did show up another issue.  The problem persisted once on a desk and not the offline, but being on a desk if i looked at the encoder for the Shutter Strobe i had a different value!

    So in either the Table view or Spreedsheet view the column for Shutter Strobe showed 15, but the encoder showed 30. So when i retried the command line using [channel selection] Shutter Strobe 30 Replace with 255 it worked perfectly.

     

    So the new issue is having one value on the encoders and another on the Live/Blind display!

Children
No Data
Related

www.etcconnect.com