• State Not Answered
  • Date
    burcyluton
  • Date
  • Replies 2 replies
  • Subscribers 185 subscribers
  • Views 3689 views
  • Users 0 members are here

sub master numbering - how do I change the number??

Hi Folks,

I'm a novice on the ion and whilst created some groups to subs masters on the fader wing, somehow I managed to save sub 25 to 2 of the faders!  How do I undo this - I need a fader no.26, at the moment I have the following 24, 25, 25, 27...... both 25's have the same info.  I did try the follling to rectify it:

[record] 26 [sub] [enter]  with different lx selected.  didn't work, seems the two 25's are somehow linked together???

ta

Parents
  • 0

    Recording a sub and assigning it to a fader are separate and distinct actions.

    Since Sub 25 is already assigned to the fader you want to use, you'll need to unassign it. Assuming you are using a fader wing, this is done by simultaneously pressing [Shift] and the 2 buttons below the fader ([Load]).

    To assign a sub to a fader the action is [Sub]26[Enter]. Then press the [Load] button for the fader. [Load]  would be both buttons below the fader simultaneously.

Reply
  • 0

    Recording a sub and assigning it to a fader are separate and distinct actions.

    Since Sub 25 is already assigned to the fader you want to use, you'll need to unassign it. Assuming you are using a fader wing, this is done by simultaneously pressing [Shift] and the 2 buttons below the fader ([Load]).

    To assign a sub to a fader the action is [Sub]26[Enter]. Then press the [Load] button for the fader. [Load]  would be both buttons below the fader simultaneously.

Children
No Data
Related

www.etcconnect.com