• State Not Answered
  • Date
    ZakMcC
  • Date
  • Replies 3 replies
  • Subscribers 186 subscribers
  • Views 4125 views
  • Users 0 members are here

Installing an ENTTEC DMX Ethernet ODE on an Ion to give third universe output.

I am currently trying to add a third Universe to an Ion (1024), using an ENTEC Open DMX Ethernet ODE. I have upgraded the Ion Output Count to 1536, but having difficulty getting the Ion to send Ethernet to the Open DMX Ethernet ODE.

Has anyone ever used this device to expand universes o an Ion?  I have been through various networking settings, but unfortunately nothing seems to activate the Ethernet link. What other settings may I have to change?

Thanks

Parents
  • 0
    this is probably a basic question of networking. sometimes you need to find the correct sequence of plugging stuff in. (i.e. start the console, when the device is already plugged in...). the other thing is, your device needs an IP address in the same subnet as the console (but not the same as any other device in the whole network). last but not least, you need to activate ArtNet as output protocol in your Ion and make sure that all patched channels have Artnet listed in their interface tile.
Reply
  • 0
    this is probably a basic question of networking. sometimes you need to find the correct sequence of plugging stuff in. (i.e. start the console, when the device is already plugged in...). the other thing is, your device needs an IP address in the same subnet as the console (but not the same as any other device in the whole network). last but not least, you need to activate ArtNet as output protocol in your Ion and make sure that all patched channels have Artnet listed in their interface tile.
Children
No Data
Related

www.etcconnect.com