New X-Key Layout attached.

Hi everyone. We have attached an X-keys layout for this new device from PI Engineering. This is a backlit keypad (in blue or red). We've set this up so the layer function toggles to the "red" layer. We've also placed in stock die-cut labels for this layout, with the text color suppressed for the inactive layer, while highlighting the text for the active layer. You can order these from ETC Inc. The part number is 4250A4067. This can be ordered from the American (https://shop.etcconnect.com) or European (https://shop.etcconnect.eu) Swag store.

Otherwise, they can be ordered from your ETC distributor/dealer.

Thanks all!

Anne

Link to PI Engineering Site:

http://xkeys.com/xkeys/xk60.php

Download Zip File (pre 2.3 - old shortcuts):

/cfs-file/__key/communityserver-discussions-components-files/15/Xkeys.zip

2.3 and up - new shortcuts:

http://www.etcconnect.com/WorkArea/DownloadAsset.aspx?id=10737481336

updated link to new xkeys layout
[edited by: Hans.Hinrichsen at 1:48 PM (GMT -5) on Wed, May 24 2017]

Parents

TMack over 10 years ago

Is there a file for Mac users? Xkeys on a Mac uses ControllerMate not Macroworks. So I am not able to use the preprogramed layout
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 10 years ago in reply to TMack

@TMack: to program an xkeys in hardware more (which you need to use it without installing drivers on the nomad computer and to make it work on every computer you plug it in to) you need to use the windows version. the mac version can only do software mode.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
TMack over 10 years ago in reply to ueliriegg

So once I program it on a windows machine it'll work with the EOS offline editor on my MacBook?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 10 years ago in reply to TMack

i'm not a mac person, but from what i hear from other users this should work. but you need to make sure to program it in Hardware mode.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
Nick Simmons over 10 years ago in reply to ueliriegg

Yes it works but as Ueli said it needs to be in hardware mode.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speedyg over 9 years ago in reply to ueliriegg

I programmed my xkeys 80 with controller mate over a year ago on my MacBook pro. The only problem I have is with the +% and the -% because of the shortcuts on the keyboard on not on the mac keyboard. I have been needing to figure out a workaround for that and I use what I have programmed just fine with the offline. But I loved the one I seen at LDI hooked up and looking at the layout i don't see the +% or -% which is a quick shortcut that I use often on the console. Just downloaded the zip and going to play with it a little bit.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 9 years ago in reply to speedyg

there is a facepanel shortcut for +% -% and i think it should work with xkeys as well: Shift + and Shift - . Shift has the hotkey Z, so Z + and Z - should act as +% and -%
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speedyg over 9 years ago in reply to ueliriegg

You know I hooked mine back up last night and played with it and now I remember it was not the +-% but it was the next and last. Since i need a page up and a page down key on my mac which I do not have. That is the work around I need to play with unless you have a solve for me there which would be totally awesome.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
ueliriegg over 9 years ago in reply to speedyg

i guess you could assign the buttons to macros and then have macros which say PgUp and PgDn. to call a macro (i.e. macro 1) from xkeys, use Ctrl+4 1 Enter. the downside is, that you need those macros in all your showfiles...
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speedyg over 9 years ago in reply to ueliriegg

That is a good option never thought of that. The only other thing I was thinking was to program it or use the file that is here and run boot camp with windows and an external keyboard because i still get limited to the keyboard on the laptop with parallels and mac. Then set the Macroworks to hardware mode to the Xkeys. But since that seemed like a lot of work for what I was after I never pursued it. If I remember when I was looking for the fix it had something to do with the ASC codes and apple just doesn't have one for page up and page down for it to recognize. I am not sure but I knew it was giving me a headache back then. Maybe the next software upgrade for eos they will have where you can type "next" or "last" in the command line. then just create that to happen in Xkeys to happen. Just as a work around for mac book laptops. Hint Hint.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

speedyg over 9 years ago in reply to ueliriegg

That is a good option never thought of that. The only other thing I was thinking was to program it or use the file that is here and run boot camp with windows and an external keyboard because i still get limited to the keyboard on the laptop with parallels and mac. Then set the Macroworks to hardware mode to the Xkeys. But since that seemed like a lot of work for what I was after I never pursued it. If I remember when I was looking for the fix it had something to do with the ASC codes and apple just doesn't have one for page up and page down for it to recognize. I am not sure but I knew it was giving me a headache back then. Maybe the next software upgrade for eos they will have where you can type "next" or "last" in the command line. then just create that to happen in Xkeys to happen. Just as a work around for mac book laptops. Hint Hint.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

travisres over 9 years ago in reply to speedyg

I assume you are working on a laptop or not a full size mac keyboard? Page Up and Page Down can be accessed by pressing Function Up arrow or Function Down arrow.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speedyg over 9 years ago in reply to travisres

and what is the ASCII code for the FN key. The controller mate software doesn't detect that when programming.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
travisres over 9 years ago in reply to speedyg

Hmm, no ASCII code for Fn as far as I know since its a modifier to turn on key "into" another. I'm not sure why controller mate doesn't recognize it as Page Up as all the other programs on the mac do (or at least Word/ Chrome / Eos)

I'm not really familiar with Controller Mate, but when I just opened it and created a Single Key Building Block there is an option to open Keystrokes Palette where you can click and drag the page up and page down key to your action. The page up and Page Down keys are the ones under the F17.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel
speedyg over 9 years ago in reply to travisres

Great !!!! That is the solution to the FN key at least for the page up and page down. Now I have next and back just fine. Thanks for you help. Glad you found it. My head was done with it a year ago. Thanks again.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel