• State Verified Answer
  • Date
    Paule
  • Date
  • Replies 5 replies
  • Subscribers 187 subscribers
  • Views 3586 views
  • Users 0 members are here

Autoblock-Cleanup issue

Hey Folks!

Had a problem with the autoblock-cleanup funktion. I´m working Q-only.
Had an effect on two 6-Bars in Q14 - level without effect 0; in Q15 the effect went out and level stayed 0. The zero-level was auto-blocked in cue 15.
When I used autoclock-cleanup: "Cue_1_/_AutoblkClean" the console tracked the effect till the next cue those 6-Bars got a level above zero again.
Before I learned about the cleanup softbutton I did that manually. I selected all cues in blind block everything and unblock everything after that.
That way everything works fine. No tracking - I just get rid of the white zeros.

I´d think autoblock-cleanup shold work the same way. So am I right and this is a bug or do I miss something?

Thanks 
Paul

Parents
  • 0

    Today I talked to my co-worker and he said he had the same problem in the same show with the same blocks before than "undo-ed" that and went on programming.
    Tracklist looked like that

    To get rid of the Autoblocks he selected those channels in Q15 and pressed @_Enter what usually not even bring the effect into Q15.
    But what it actually did was tracking it till Q210.

    As we´re working Q-only this is a bug in both cases right?
    For shure there is a workaround I´d just be happy to know if I this will be fixed or if I´m wrong in how these commands work?!

    Thx
    Paul

Reply
  • 0

    Today I talked to my co-worker and he said he had the same problem in the same show with the same blocks before than "undo-ed" that and went on programming.
    Tracklist looked like that

    To get rid of the Autoblocks he selected those channels in Q15 and pressed @_Enter what usually not even bring the effect into Q15.
    But what it actually did was tracking it till Q210.

    As we´re working Q-only this is a bug in both cases right?
    For shure there is a workaround I´d just be happy to know if I this will be fixed or if I´m wrong in how these commands work?!

    Thx
    Paul

Children
Related

www.etcconnect.com