Flash Intensity only

You might try regular proportional subs, but with only intensity info recorded. Either use the Int filter when recording or go in Blind and delete all the color/position/ect stuff.

I haven't tried it, but I suspect you could use a magic sheet button or direct select as a bump. The trick would be getting a variable duration. It might take 2 buttons; On & Sneak back to level.

Hi Richard, Druuka, had the right answer,.....well when i figure out the second part to do the initial save Sub with int. only.
What i often do is use my bump buttons like a keyboard and bump to beats...or flash for gun fire or a manual fire effect. that sort of thing. magic sheets, could work but not as efficiently.

to record selectively, there are multiple ways:
- Chan 1 Intensity Record Sub 1 Enter
- if the only manual (i.e. red) values are intensity you can use RecordOnly Sub 1 Enter
- a combination of the two...
- or set a Filter: Keep Filter pressed and in the CIA select Intensity. use Record Sub 1 Enter. afterwards don't forget to clear Filters, by Keeping Filter pressed and then choose Clear Filters in the CIA. NB: Filter is a positive choice, i.e. you choose the parameters you do want to record

to record selectively, there are multiple ways:
- Chan 1 Intensity Record Sub 1 Enter
- if the only manual (i.e. red) values are intensity you can use RecordOnly Sub 1 Enter
- a combination of the two...
- or set a Filter: Keep Filter pressed and in the CIA select Intensity. use Record Sub 1 Enter. afterwards don't forget to clear Filters, by Keeping Filter pressed and then choose Clear Filters in the CIA. NB: Filter is a positive choice, i.e. you choose the parameters you do want to record

thanks, Guys....Sorted Now. and I now know how to do it both at initial record and if i need to go back and fix a sub. this has been bugging for weeks, but decided i would leave if for the 2.3.2.
thanks again.